BCJYM - CADVERT 375 SECONDARY PLATING ADDITIVE

  • MSDS: BCJYM
  • Manufacturer: MACDERMID INC
  • Product Name: CADVERT 375 SECONDARY PLATING ADDITIVE
  • National Stock Number: 6850-00N003423
Product Identification

Product ID:CADVERT 375 SECONDARY PLATING ADDITIVE
MSDS Date:01/01/1985
FSC:6850
NIIN:00N003423
MSDS Number: BCJYM

Responsible Party
MACDERMID, INC

Emergency Phone: 203-575-5700

Cage: 13501

Contractor
MACDERMID, INC
WATERBURY, CT 06702 US

Telephone: 203-575-5700

Cage: 13501

Ingredients

2-ETHOXYETHANOL (EGEE) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

OSHA PEL S,200 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:LIQ CAUSE SKIN IRRIT & CAN ABSORB THROUGH SKIN.
INHAL OF VAP CAUSE NOSE & THROAT IRRIT.SEE SUPP DATA

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER FOR 15 MIN. CALL MD. SKIN:
WASH WITH SOAP & WATER. INHALATION: PROVIDE FRESH AIR.

Fire Fighting

Flash Point:145F; 63C, CC
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:NEUTRALIZE SPILL WITH BICARBONATE, SODA ASH OR
SIMILIAR ALKALI. VACUUM OR MOP UP SPILL. RINSE RESIDUES WITH WATER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT & SOURCES OF
IGNITION. KEEP AWAY FROM FOOD STUFFS. WASH THOROUGHLY AFTER
HANDLING.
Other Precautions:USE ONLY IN WELL VENTILATED AREAS WITH SUFFICIENT AIR
MOVEMENT TO MAINTAIN AIRBORNE CONCENTRATION LEVELS BELOW TLV. AVOID
PROLONGED OR REPEATED EYE & SKIN CONTACT. DO NOT BREATHE VAPORS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPRVD HALF-FACE-PIECE
CARTRIDGE,AIR PURIFYING RESP.
Ventilation:LOCAL EXHAUST RECOMMENDED TO KEEP BELOW TLV.
Protective Gloves:RUBBER,NEOPRENE
Eye Protection:CHEMICAL GOG/FACE SHIELD
Other Protective Equipment:IMPERVIOUS CLOTHES & FOOTWEAR.
Supplemental Safety and Health
PH- 2.2. OVEREXPOSURE: LIQ CAN CAUSE SEVERE EYE IRRITATION & MAY CAUSE
PERMANENT EYE DAMAGE. VAPORS MAY CAUSE EYE IRRITATION. PREVIOUSLY
MANUFACTURED BY 3M CO.

Chemical Properties

Boiling Pt:B.P. Text:198F; 92C
Spec Gravity:1.009
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR YELLOWISH LIQUID WITH A PUNGENT ODOR
Percent Volatiles by Volume:88.6

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:MANUFACTURER RECOMMENDS DILUTION. NEUTRALIZED
PRODUCT MAY BLEND INTO A WASTE WATER TREATMENT SYSTEM. DISPOSAL
METHODS MUST BE IAW FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.